Specifications | ||||||||
Model | D-10 | D-10S | DN-10 | DN-10S | D-20 | D-20S | DN-20 | DN-20S |
Range | 10mm | 20mm | ||||||
Resolution | 0.01mm | 0.001mm | 0.01mm | 0.001mm | 0.01mm | 0.001mm | 0.01mm | 0.001mm |
Accuracy (excluding quantized error) | 0.005mm | 0.002mm | 0.01mm | 0.002mm | 0.005mm | 0.003mm | 0.01mm | 0.003mm |
Measuring force | Less than 1.0N | Less than 1.5N | ||||||
Cable length | 2m | |||||||
Mounting method | ?8mm stem or 6.5mm hole on lug back | |||||||
Contact point | M2.5 × 0.45 S?2.4mm cooper (X-2) | |||||||
Operating temperature | 0 - 40oC | |||||||
Weight | 220g | 300g | ||||||
Output Signal | 90o phase difference, 20μm pitch (R03-PB8M Tajimi connector) Rectangular wave (Low=0V High=8V) | |||||||
Compatible standard counters | C-500 / C-700 CM-5B | |||||||
Options | * Release (RE-4) Lifting lever (LL-1) * Dust proof rubber (BG-10) * Flat back (GB3-D1O) , screws (S-110) | * Release (RE-4) * Flat back (GB3-D20) | ||||||
* Customer must specify if application is up-side-down. The measuring force changes when the gauge is inverted. | ||||||||
* Features DN-10 DN-10S DN-20 DN-20S 1. Recommended for locations where cable extension (10 to 50 meters) is necessary. 2. Recommended for use in electrically noisy environments. Notes of wiring : A signal wire should be duct wiring apart from other Power lines. |
Dimensions |
D-10 / D-10S / DN-10 / DN-10S / D-10SS |
D-20 / D-20S / DN-20 / DN-20S |